Suspension
VW BORA I (1J2) 2.3 V5 150 hp
Brand
Product type
Price
Ressorts Courts
3
ap Lowering Springs -40/30
213.–
Delivered on 08.11.2026 if ordered by 17:00
3
| Brand | ap |
| Reference | 25980029 |
| EAN | 4250719612919 |
| Lowering | Avant: -40mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: 991-1060kg Rear: -1010kg |
Ressorts Courts
3
ap Lowering Springs -40/30
213.–
Delivered on 08.11.2026 if ordered by 17:00
3
| Brand | ap |
| Reference | 25980047 |
| EAN | 4250719613022 |
| Lowering | Avant: -40mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: 911-990kg Rear: -930kg |
Ressorts Courts
3
ap Lowering Springs -50/30
223.–
Delivered on 16.11.2026 if ordered by 17:00
3
| Brand | ap |
| Reference | 25980048 |
| EAN | 4250719613039 |
| Remarks | To be used Exclusively with short shock absorbers For lowering of 45mm or more, the anti-roll bar conversion kit reference ZB50-008 may be required to ensure sufficient clearance between the drive shaft and the anti-roll bar. |
| Lowering | Avant: -50mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: 911-990kg Rear: -930kg |
Coupelles
9
SNR Strut Top Mount Front Strut Top Mount
11.90
12.90
Delivered tomorrow (Only 6 pieces in stock)
−7 %
Only 4 of 4 left
9
| Brand | SNR |
| Reference | KB657.08 |
| EAN | 3413520371142 |
| Remarks | Vendu à l'unité |
| Applications | A3 8L / Leon 1M / Golf IV |
Ressorts Courts
50
ST Lowering Springs -40/40
290.–
Delivered on 08.11.2026 if ordered by 17:00
50
| Brand | ST |
| Reference | 28280025 |
| EAN | 4250173349796 |
| Remarks | Only suitable for vehicles with a standard shaft (see note 121). |
| Lowering | Avant: -40mm / Arrière: -40mm |
| DTC certificate for lowering >40mm | P-305/00 |
| Homologation | Swiss-approved |
Ressorts Courts
50
ST Lowering Springs -50/50
290.–
Delivered on 08.11.2026 if ordered by 17:00
50
| Brand | ST |
| Reference | 28280053 |
| EAN | 4250173350068 |
| Remarks | Only suitable for vehicles with a standard shaft (see note 121). On suspensions with a lowering of 45mm or more, the anti-roll bar must be changed to ensure clearance for the right drive shaft. Conversion kit for vehicles without xenon headlights, art. no. 685 50 006. Conversion kit for vehicles with xenon headlights, art. no. 685 50 007 |
| Lowering | Avant: -50mm / Arrière: -50mm |
| DTC certificate for lowering >40mm | P-117/98 |
| Homologation | Swiss-approved |
Ressorts Courts
50
ST Lowering Springs -50/50
290.–
Delivered on 03.11.2026 if ordered by 17:00
50
| Brand | ST |
| Reference | 28280054 |
| EAN | 4250173350075 |
| Remarks | Only suitable for vehicles with a standard shaft (see note 121). On suspensions with a lowering of 45mm or more, the anti-roll bar must be changed to ensure clearance for the right drive shaft. Conversion kit for vehicles without xenon headlights, art. no. 685 50 006. Conversion kit for vehicles with xenon headlights, art. no. 685 50 007 |
| Lowering | Avant: -50mm / Arrière: -50mm |
| Homologation | Swiss-approved |
| Axle Load | Front: -1020kg Rear: -960kg |
Combinés Filetés
17
ap Coilovers 30-50/30-50
748.–
Delivered on 03.11.2026 if ordered by 17:00
17
| Brand | ap |
| Reference | 11582002 |
| EAN | 4250719602675 |
| Remarks | Fitting may require wheel spacers when fitted with original wheel and tyre sizes. For models with 50mm diameter drive shafts, it is strongly recommended to replace the original anti-roll bar to avoid any contact with the right-hand drive shaft (reference ZB50-016 for versions without xenon / ZB50-017 for versions with xenon). In case of extreme lowering, it is strongly recommended to replace the anti-roll bar to avoid any contact with the right-hand drive shaft. For versions without xenon headlights, use anti-roll bar REF. ZB50-016; for versions with xenon headlights, use anti-roll bar REF. ZB50-017. |
| Lowering | Avant: -30-50mm / Arrière: -30-50mm |
| Homologation | Swiss-approved |
| Axle Load | Front: -1020kg Rear: -1080kg |
Combinés Filetés
39
ST X Coilovers 35-65/35-65
981.–
Delivered on 03.11.2026 if ordered by 17:00
39
| Brand | ST |
| Reference | 13282002 |
| EAN | 4250173325264 |
| Remarks | Not for (4WD, 4x4, 4Motion, etc.) vehicles. Spacers may be required depending on the wheel/tyre size. Only suitable for vehicles with a standard shaft (see note 121). For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008. |
| Lowering | Avant: -35-65mm / Arrière: -35-65mm |
| Adjustment Types | Height Adjustment |
| DTC certificate for lowering >40mm | P-2978/10 |
Combinés Filetés
24
KW V1 Coilovers 35-65/35-65
1175.–
Delivered on 03.11.2026 if ordered by 17:00
24
| Brand | KW |
| Reference | 10282002 |
| EAN | 4250173303354 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm |
| Lowering | Avant: -35-65mm / Arrière: -35-65mm |
| Adjustment Types | Height Adjustment |
| DTC certificate for lowering >40mm | P-2978/10 |
Combinés Filetés
7
ST XA Coilovers 35-65/35-65
1253.–
Delivered on 03.11.2026 if ordered by 17:00
7
| Brand | ST |
| Reference | 18282002 |
| EAN | 4250173326513 |
| Remarks | Not for (4WD, 4x4, 4Motion, etc.) vehicles. Spacers may be required depending on the wheel/tyre size. Only suitable for vehicles with a standard shaft (see note 121). For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008. |
| Lowering | Avant: -35-65mm / Arrière: -35-65mm |
| Adjustment Types | Height & Damping |
| DTC certificate for lowering >40mm | P-2978/10 |
Combinés Filetés
9
ST XTA Coilovers 35-65/35-65
1447.–
Delivered on 08.11.2026 if ordered by 17:00
9
| Brand | ST |
| Reference | 18282802 |
| EAN | 4250580439295 |
| Remarks | Not for (4WD, 4x4, 4Motion, etc.) vehicles. Spacers may be required depending on the wheel/tyre size. Only suitable for vehicles with a standard shaft (see note 121). For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008. |
| Lowering | Avant: -35-65mm / Arrière: -35-65mm |
| Adjustment Types | Height, Damping & Camber Adjustment |
| Warning | A DTC certificate for shock absorbers with camber top mounts is required by the cantonal road traffic office. It can be provided for 95.- and is automatically added to the basket. |
Combinés Filetés
5
KW V2 Coilovers 35-65/35-65
1486.–
Delivered on 08.11.2026 if ordered by 17:00
5
| Brand | KW |
| Reference | 15282002 |
| EAN | 4250173306775 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm |
| Lowering | Avant: -35-65mm / Arrière: -35-65mm |
| Adjustment Types | Height & Damping |
| DTC certificate for lowering >40mm | P-2978/10 |
Combinés Filetés
12
KW V3 Coilovers 35-65/35-65
2021.–
Delivered on 08.11.2026 if ordered by 17:00
12
| Brand | KW |
| Reference | 35282002 |
| EAN | 4250173318358 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm |
| Lowering | Avant: -35-65mm / Arrière: -35-65mm |
| Adjustment Types | Height, Rebound & Compression Adjustment |
| DTC certificate for lowering >40mm | P-2978/10 |