Suspension
VW BORA Variant (1J6) 1.6 102 hp

Filtrer
11 items

Brand
Product type
Prix
Filtrer
Ressorts Courts

ap Lowering Springs -40/30

223.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
3
Brand ap
Reference 25980210
EAN 4250719613411
Lowering Avant: -40mm / Arrière: -30mm
Homologation Swiss-approved
Axle Load Front: 911-990kg Rear: -1010kg
Ressorts Courts

ap Lowering Springs -50/30

242.–
Delivered on 01.11.2026 if ordered by tomorrow 17:00
3
Brand ap
Reference 25980026
EAN 4250719612896
Remarks To be used Exclusively with short shock absorbers
For lowering of 45mm or more, the anti-roll bar conversion kit reference ZB50-008 may be required to ensure sufficient clearance between the drive shaft and the anti-roll bar.
Lowering Avant: -50mm / Arrière: -30mm
Homologation Swiss-approved
Axle Load Front: 911-990kg Rear: -1010kg
Ressorts Courts

ST Lowering Springs -40/40

290.–
Delivered on 03.11.2026 if ordered by tomorrow 17:00
50
Brand ST
Reference 28280077
EAN 4250173390156
Lowering Avant: -40mm / Arrière: -40mm
DTC certificate for lowering >40mm P-4142/13
Homologation Swiss-approved
Axle Load Front: -930kg Rear: -1020kg
Coupelles

SNR Strut Top Mount Front Strut Top Mount

12.90
Delivered on 22.10.2026 (Only 6 pieces in stock)
9
Brand SNR
Reference KB657.08
EAN 3413520371142
Remarks Vendu à l'unité
Applications A3 8L / Leon 1M / Golf IV
Combinés Filetés

ap Coilovers 30-50/30-50

748.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
15
Brand ap
Reference 11582002
EAN 4250719602675
Remarks Fitting may require wheel spacers when fitted with original wheel and tyre sizes.
For models with 50mm diameter drive shafts, it is strongly recommended to replace the original anti-roll bar to avoid any contact with the right-hand drive shaft (reference ZB50-016 for versions without xenon / ZB50-017 for versions with xenon).
In case of extreme lowering, it is strongly recommended to replace the anti-roll bar to avoid any contact with the right-hand drive shaft. For versions without xenon headlights, use anti-roll bar REF. ZB50-016; for versions with xenon headlights, use anti-roll bar REF. ZB50-017.
Lowering Avant: -30-50mm / Arrière: -30-50mm
Homologation Swiss-approved
Axle Load Front: -1020kg Rear: -1080kg
Combinés Filetés

ST X Coilovers 35-65/35-65

981.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
39
Brand ST
Reference 13282002
EAN 4250173325264
Remarks Not for (4WD, 4x4, 4Motion, etc.) vehicles.
Spacers may be required depending on the wheel/tyre size.
Only suitable for vehicles with a standard shaft (see note 121).
For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008.
Lowering Avant: -35-65mm / Arrière: -35-65mm
Adjustment Types Height Adjustment
DTC certificate for lowering >40mm P-2978/10
Combinés Filetés

KW V1 Coilovers 35-65/35-65

1175.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
24
Brand KW
Reference 10282002
EAN 4250173303354
Remarks Front + rear height-adjustable: coilovers / adjustable springs + independent suspension
Spacers may be required with the original wheels/tyres
An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00
For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm
Lowering Avant: -35-65mm / Arrière: -35-65mm
Adjustment Types Height Adjustment
DTC certificate for lowering >40mm P-2978/10
Combinés Filetés

ST XA Coilovers 35-65/35-65

1253.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
7
Brand ST
Reference 18282002
EAN 4250173326513
Remarks Not for (4WD, 4x4, 4Motion, etc.) vehicles.
Spacers may be required depending on the wheel/tyre size.
Only suitable for vehicles with a standard shaft (see note 121).
For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008.
Lowering Avant: -35-65mm / Arrière: -35-65mm
Adjustment Types Height & Damping
DTC certificate for lowering >40mm P-2978/10
Combinés Filetés

ST XTA Coilovers 35-65/35-65

1447.–
Delivered on 03.11.2026 if ordered by tomorrow 17:00
9
Brand ST
Reference 18282802
EAN 4250580439295
Remarks Not for (4WD, 4x4, 4Motion, etc.) vehicles.
Spacers may be required depending on the wheel/tyre size.
Only suitable for vehicles with a standard shaft (see note 121).
For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008.
Lowering Avant: -35-65mm / Arrière: -35-65mm
Adjustment Types Height, Damping & Camber Adjustment
Warning A DTC certificate for shock absorbers with camber top mounts is required by the cantonal road traffic office. It can be provided for 95.- and is automatically added to the basket.
Combinés Filetés

KW V2 Coilovers 35-65/35-65

1486.–
Delivered on 03.11.2026 if ordered by tomorrow 17:00
5
Brand KW
Reference 15282002
EAN 4250173306775
Remarks Front + rear height-adjustable: coilovers / adjustable springs + independent suspension
Spacers may be required with the original wheels/tyres
An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00
For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm
Lowering Avant: -35-65mm / Arrière: -35-65mm
Adjustment Types Height & Damping
DTC certificate for lowering >40mm P-2978/10
Combinés Filetés

KW V3 Coilovers 35-65/35-65

2021.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
12
Brand KW
Reference 35282002
EAN 4250173318358
Remarks Front + rear height-adjustable: coilovers / adjustable springs + independent suspension
Spacers may be required with the original wheels/tyres
An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00
For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm
Lowering Avant: -35-65mm / Arrière: -35-65mm
Adjustment Types Height, Rebound & Compression Adjustment
DTC certificate for lowering >40mm P-2978/10