Suspension
AUDI A3 (8L1) 1.8 125 hp
Brand
Product type
Prix
Ressorts Courts
3
ap Lowering Springs -40/30
213.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
3
| Brand | ap |
| Reference | 25910001 |
| EAN | 4250719606628 |
| Lowering | Avant: -40mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: -910kg Rear: -985kg |
Ressorts Courts
3
ap Lowering Springs -40/30
213.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
3
| Brand | ap |
| Reference | 25910328 |
| EAN | 4250719607144 |
| Lowering | Avant: -40mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: 911-990kg Rear: -985kg |
Ressorts Courts
3
ap Lowering Springs -50/30
223.–
Delivered on 01.11.2026 if ordered by tomorrow 17:00
3
| Brand | ap |
| Reference | 25910020 |
| EAN | 4250719606758 |
| Remarks | To be used Exclusively with short shock absorbers For lowering of 45mm or more, the anti-roll bar conversion kit reference ZB50-008 may be required to ensure sufficient clearance between the drive shaft and the anti-roll bar. V-Tec engines |
| Lowering | Avant: -50mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: -910kg Rear: -985kg |
Coupelles
9
SNR Strut Top Mount Front Strut Top Mount
12.90
Delivered on 22.10.2026 (Only 6 pieces in stock)
9
| Brand | SNR |
| Reference | KB657.08 |
| EAN | 3413520371142 |
| Remarks | Vendu à l'unité |
| Applications | A3 8L / Leon 1M / Golf IV |
Ressorts Courts
3
ap Lowering Springs -50/30
223.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
3
| Brand | ap |
| Reference | 25910395 |
| EAN | 4250719607434 |
| Remarks | To be used Exclusively with short shock absorbers For lowering of 45mm or more, the anti-roll bar conversion kit reference ZB50-008 may be required to ensure sufficient clearance between the drive shaft and the anti-roll bar. V-Tec engines |
| Lowering | Avant: -50mm / Arrière: -30mm |
| Homologation | Swiss-approved |
| Axle Load | Front: 911-990kg Rear: -985kg |
Ressorts Courts
138
H&R Lowering Springs -35/35
251.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
138
| Brand | H&R |
| Reference | 29767-1 |
| Lowering | Avant: -35mm / Arrière: -35mm |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD bis -910kg VA-Last 96-03 |
| Country of Manufacture | Made in Germany  |
Ressorts Courts
138
H&R Lowering Springs -35/35
251.–
Delivered between 21.10.2026 and 26.10.2026
138
| Brand | H&R |
| Reference | 29767-2 |
| Lowering | Avant: -35mm / Arrière: -35mm |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD ab 911kg- VA-Last 96-03 |
| Country of Manufacture | Made in Germany |
Ressorts Courts
138
H&R Lowering Springs -45/45
268.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
138
| Brand | H&R |
| Reference | 29768-1 |
| Lowering | Avant: -45mm / Arrière: -45mm |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD alle (Tiefere Sportversion) 96-03 |
| Country of Manufacture | Made in Germany |
Ressorts Courts
50
ST Lowering Springs -40/40
290.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
50
| Brand | ST |
| Reference | 28210001 |
| EAN | 4250173341653 |
| Lowering | Avant: -40mm / Arrière: -40mm |
| Remarks | Pour véhicules sans Tiptronic |
| Homologation | Swiss-approved |
| Axle Load | Front: -980kg Rear: -930kg |
Ressorts Courts
50
ST Lowering Springs -40/40
290.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
50
| Brand | ST |
| Reference | 28210101 |
| EAN | 4250173384841 |
| Lowering | Avant: -40mm / Arrière: -40mm |
| Remarks | Pour véhicules avec Tiptronic |
| Homologation | Swiss-approved |
| Axle Load | Front: 981-1020kg Rear: -930kg |
Barres Antiroulis
8
H&R Anti-Roll Bar Kit 22/Nein
321.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
8
| Brand | H&R |
| Reference | 33525-1 |
| Remarks | |
| Lowering | Avant: -22mm / Arrière: -Neinmm |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD 96-03 |
| Country of Manufacture | Made in Germany |
Barres Antiroulis
8
H&R Anti-Roll Bar Kit 26/Nein/22/Nein
676.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
8
| Brand | H&R |
| Reference | 33525-2 |
| Remarks | |
| Front Diameter | 26/Neinmm |
| Front Diameter | 22/Neinmm |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD 96-03 |
Combinés Filetés
15
ap Coilovers 30-65/30-65
806.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
15
| Brand | ap |
| Reference | 11510005 |
| EAN | 4250719600121 |
| Remarks | Fitting may require wheel spacers when fitted with original wheel and tyre sizes. For models with 50mm diameter drive shafts, it is strongly recommended to replace the original anti-roll bar to avoid any contact with the right-hand drive shaft (reference ZB50-016 for versions without xenon / ZB50-017 for versions with xenon). In case of extreme lowering, it is strongly recommended to replace the anti-roll bar to avoid any contact with the right-hand drive shaft. For versions without xenon headlights, use anti-roll bar REF. ZB50-016; for versions with xenon headlights, use anti-roll bar REF. ZB50-017. |
| Lowering | Avant: -30-65mm / Arrière: -30-65mm |
| Homologation | Swiss-approved |
| Axle Load | Front: -1020kg Rear: -1025kg |
Combinés Filetés
39
ST X Coilovers 30-70/30-70
981.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
39
| Brand | ST |
| Reference | 13210005 |
| EAN | 4250173323826 |
| Remarks | Spacers may be required depending on the wheel/tyre size. Only suitable for vehicles with a standard shaft (see note 121). For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008. |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height Adjustment |
| DTC certificate for lowering >40mm | P-3424/11 |
Combinés Filetés
24
KW V1 Coilovers 30-70/30-70
1175.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
24
| Brand | KW |
| Reference | 10210005 |
| EAN | 4250173300148 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height Adjustment |
| DTC certificate for lowering >40mm | P-3424/11 |
Combinés Filetés
7
ST XA Coilovers 30-70/30-70
1253.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
7
| Brand | ST |
| Reference | 18210005 |
| EAN | 4250173325813 |
| Remarks | Spacers may be required depending on the wheel/tyre size. Only suitable for vehicles with a standard shaft (see note 121). For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008. |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height & Damping |
| DTC certificate for lowering >40mm | P-3424/11 |
Combinés Filetés
9
ST XTA Coilovers 30-70/30-70
1447.–
Delivered on 03.11.2026 if ordered by tomorrow 17:00
9
| Brand | ST |
| Reference | 18210805 |
| EAN | 4250580439189 |
| Remarks | Spacers may be required depending on the wheel/tyre size. Only suitable for vehicles with a standard shaft (see note 121). For the maximum tested lowering, the anti-roll bar must be converted: without xenon headlights art. no. 685 50 000, with xenon art. no. 685 50 005; alternatively, for lower-powered vehicles, use drop link art. no. 685 50 008. |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height, Damping & Camber Adjustment |
| Warning | A DTC certificate for shock absorbers with camber top mounts is required by the cantonal road traffic office. It can be provided for 95.- and is automatically added to the basket. |
Combinés Filetés
5
KW V2 Coilovers 30-70/30-70
1486.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
5
| Brand | KW |
| Reference | 15210005 |
| EAN | 4250173303682 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height & Damping |
| DTC certificate for lowering >40mm | P-3424/11 |
Combinés Filetés
3
H&R Monotube Coilovers 30-55/30-55
1529.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
3
| Brand | H&R |
| Reference | 29525-1 |
| Remarks | |
| Lowering | Avant: -30-55mm / Arrière: -30-55mm |
| Adjustment Types | Height Adjustment |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD alle bis -910kg VA-Last 96-03 |
Combinés Filetés
3
H&R Monotube Coilovers 30-55/30-55
1529.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
3
| Brand | H&R |
| Reference | 29525-2 |
| Remarks | |
| Lowering | Avant: -30-55mm / Arrière: -30-55mm |
| Adjustment Types | Height Adjustment |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD alle ab 911kg- VA-Last 96-03 |
Combinés Filetés
8
Bilstein B14 Coilovers 25-45/25-45
1533.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
8
| Brand | Bilstein |
| Reference | 47-124851 |
| Lowering | Avant: -25-45mm / Arrière: -25-45mm |
| Adjustment Types | Height Adjustment |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD alle bis -1'060kg VA-Last 96-03 T40 F?r einige Rad-/Reifenkombinationen bei Basis-Modellen evtl. Distanzscheiben erforderlich |
| Country of Manufacture | Made in Germany |
Combinés Filetés
1
KW V2 Comfort Coilovers 20-45/20-45
1564.–
Delivered on 02.11.2026 if ordered by tomorrow 17:00
1
| Brand | KW |
| Reference | 18010005 |
| EAN | 4250173364249 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres Recommended for more suspension travel and comfort; without xenon: KW no. 685 50 000 CHF 271.00 and xenon: KW no. 685 50 005, CHF 298.00 |
| Lowering | Avant: -20-45mm / Arrière: -20-45mm |
| DTC certificate for lowering >40mm | P-3424/11 |
| Homologation | Swiss-approved |
Combinés Filetés
12
KW V3 Coilovers 30-70/30-70
2021.–
Delivered on 22.10.2026 if ordered by tomorrow 17:00
12
| Brand | KW |
| Reference | 35210005 |
| EAN | 4250173316514 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height, Rebound & Compression Adjustment |
| DTC certificate for lowering >40mm | P-3424/11 |
Combinés Filetés
Bilstein B16 Coilovers 25-45/25-45
2215.–
On order. Expected delivery between 30.10.2026 and 05.11.2026
| Brand | Bilstein |
| Reference | 48-080651 |
| Lowering | Avant: -25-45mm / Arrière: -25-45mm |
| Adjustment Types | Height & Damping |
| Homologation | Swiss-approved |
| Applications | A3 (8L) 2WD alle bis -1'060kg VA-Last 96-03 |
| Country of Manufacture | Made in Germany |
Combinés Filetés
12
KW V3 Coilovers 30-70/30-70
3332.–
Delivered on 27.10.2026 if ordered by tomorrow 17:00
12
| Brand | KW |
| Reference | 35210805 |
| EAN | 4250173362306 |
| Remarks | Front + rear height-adjustable: coilovers / adjustable springs + independent suspension Spacers may be required with the original wheels/tyres An anti-roll bar replacement kit is required for lowering of more than 40mm: without xenon headlights: 685 50 000 CHF 271.00; with xenon headlights: 685 50 005 CHF 298.00 For vehicles with a (right-hand) drive shaft larger than Ø 42mm, the maximum TÜV-tested lowering is reduced by 15mm Without TÜV report |
| Lowering | Avant: -30-70mm / Arrière: -30-70mm |
| Adjustment Types | Height, Rebound & Compression Adjustment |
| Homologation | Swiss-approved |